Fall Promo: free shipping on orders of $99 or more with PROMO CODE FALL2021
Here are some of our most frequently asked questions and some of the most popular forms needed to inform you on our products.
The way the shopping cart on our website works, we must show a product “IN STOCK” or it cannot be added to the cart. If it is marked “OUT OF STOCK”, all buying options are blocked. We show “IN STOCK” and give you the estimated lead time in order for you to be able to purchase a seat online and have your order placed in the lineup. Some styles of seats may be in stock at many dealer locations across the USA, UK and Australia. If you need a seat sooner than our lead time, we may be able to direct to you to a dealer that has one in stock. You may also browse our Find A Dealer page and see the description for each dealer, listing the most popular products they carry.
Yes, our website shows the price of the seat and cover. Additional options are available such as adding a stripe to the cover and having the seat powder coated are not reflected in the price on the product page, but if chosen, will be added to the total of the product in the cart and at checkout.
When placing an order with us, your card information is stored on a secure payment site, we are given a location on the administration side of this page, where we can click “Charge Now” . We cannot see any card information, only the Shipping & Billing Address, Phone Number and Email address you provide. Your card is not charged until we click the “Charge Now” button on our end. This way if an item was out of stock, or changes are made to the order, we can adjust the total and charge the correct amount without having to make multiple orders.
If you need a custom seat, the first thing you need to do is download our Seat Measurement Form and fill it out completely. We will not automatically bill you for a custom seat, we wait for your go-ahead. Please read and follow all the instructions on the chart, all measurements are “Straight-Line” measurements, do not bend the measuring tool, it is always better for someone else to measure the person needing to be fitted. After you have the measurements, send the form by email (email@example.com) or FAX 903-894-3212, or mail the form (Ultra Shield Race Products, 19313 US Highway 69 S. , Flint, TX 75762). We will look at your measurements, let you know if something looks off, and suggest the best fit for you. The additional cost starts at $100-$200 depending on size and model of seat.
If you are unsure if you need a custom seat or what size seat you need, download and fill out the Seat Measurement Chart Below. Send the measurements to (firstname.lastname@example.org) and we can let you know which size fits best.
As a general rule seats fit as the following:
Junior - Hip & Rib width Sizes from 11" to 14"; Shoulder Belt Height at 18" standard; Rib Support Height at 13" on the Right and 12" on the Left. 11" is the narrowest we can safely make. Anything narrower and we cannot get the welding equipment inside the seat for a proper weld.
Small Adult - Hip & Rib Sizes from 11" to 14"; Shoulder Belt Height at 21"; Rib Support Height at 15" On the Right and 14" on the Left.
Adult - Hip & Rib Width Sizes from 14" to 18"; Shoulder Belt Height at 25"; Rib Support Height at 18" on the Right and 17" on the Left. (EFC seat has equal height ribs at 17") This applies to Circle Track Seats, Road Race/ Drag Seats have lower rib supports equal length and height.
Seats with the 1" Tall Option - 1" Taller ABOVE the rib supports, Shoulder belt height is raised 1" and Shoulder supports, head, and head supports are also adjusted up 1".
Seats with the 1" Lower Option - Shoulder Belt Height lowered to 1" with Head, Head Supports, Shoulder shupports., Ribs adjusted to fit when needed based on seat model.
There is a part number placed on the back of all of our seats. If yours is missing, take a picture of the seat and email to (email@example.com). We can identify the seat and let you know if covers are available for that model and what the cost and lead time will be. We typically can make covers for seats up to 10 years since they were discontinued. We cannot make covers for many custom seats without the seat on hand. Even then the seat must be within the 10 years since that style was discontinued. If the seat has rubber trim anywhere, the seat was built prior to the year 2000, no covers are available. If the original cover has a yellow Ultra Shield patch, or the seat has a yellow Ultra Shield Decal, the seat was made prior to 2003, covers are not available.
This YouTube Video by Speed Media Productions, featuring : Eric Walls - ALL STAR SPRINT CAR SERIES ; Dave Sharpley - Sharp Advantage Safety Products ; and Daryn Pittman - World of Outlaws Sprint Car Driver, shows the best way to mount your seat and seat belts in a sprint car. Click Here for the Video : Sprint Car Safety Video
Restraint System Information
Seat Measurement Form
Tearoff™ Fit Chart
SFI Guide to Mounting Belts
SFI Labels Handout
Re-Web your SFI 16.1 Harness
Why Tearoffs do not work on all helmets.